Home

  • banner

Belkin range setup

If we look at how long the Wi-Fi technology has emerged and immersed the world into itself, we can safely say that Range Extenders have been a fairly recent concept. In the 2000s the Wi-Fi technology was welcomed in the world with a thundering applause. The internet searches changed. They changed from finding the best router that can share the fastest Wi-Fi in the house to finding ways to spread the faster internet over a wide range using the range extenders. There are a few reasons why specifically it has been Belkin that has been topping the charts in terms of flawless technology and popularity.

http://rangesetup.com/

The range extension devices used by Belkin, especially the n-series have proven to the world that Belkin is still very much in the game and can still dominate it. Due to the ever advancing technology used by the Belkin Corporation, the devices Belkin introduced in the market kept getting more compact and faster up till the point that the range extenders they introduced have become this popular. Even though the Belkin range extender setup process is somehow easy, people still do regularly ask to understand how it’s done. The fact that the setup and use process of Belkin N-series range extenders is extremely easy; people often think it’s too good to be true. To prove the point the steps are literally as easy as se to plug and play which you can find here.

Before we discuss the Belkin setup process of how to initiate the range extender, we would like to share information about the N-series router and how they’ve become this famous and popular amongst the many fans they have. This is because of the many features they have and not just because of a Belkin extender setup process.

Size

The compact and effective size of the Belkin N-series range extenders makes them extremely handy and super useful. This compact size makes it handy and makes it look pretty easy to remove and plug in to any possible socket. This also gives the user an advantage as the compact nature won’t block any socket other than the one it’s plugged in, unlike other range extenders.

Range

The N series Belkin range extenders can add an enormous area to the total wireless router coverage. An area of around 5000 square feet can be covered along with the wireless router and provide high speed internet to all the previously existing devices on the network.

All standards wireless compatible

The wireless compatibility of the range extender can accommodate all the pre existing wireless standards right from and down to 802.11 a/b/g/n wireless standards. This faster working version of Wi-Fi can give a speed to the user of up to 300Mbps which can provide the user to access the internet faster and still stream seamlessly and do light to average gaming, easily.

Faster Smart phone connection

Your cellular data can take a breather as all your mobile devices like tablet, laptops, and smartphones can connect to a connection faster than anything they’ve connected so far. Witness the sudden jump in speed yourself as the Belkin N series range extenders leave no dead zones active in your house.

Setup

We can now try and find out what Belkin range extender setup n300 and n600 devices need. First and foremost, comes the placement of the said devices and the things you’d need to setup the Range extender.
Your N-series device needs to be plugged into a socket that’s resting at the edge of the wireless network from your Wi-Fi router and should have at least 2 bars of connection. Once you find that, you can plug the Range extender into the wall socket. Before we start the Belkin extender setup process, we would need to make sure we have two things. One, we would need the SSID name and password of the wireless router in your house. Two, we would require an Ethernet cable to connect your Range extender to a PC or a laptop to complete Belkin range extender setup.

Wireless setup

Step 1: After plugging in and switching on the Belkin Range Extender, you will start to see a “Belkin.setup” wireless network name. Until then, make sure you didn’t have anything connected to your Ethernet port. Connect to it.

Step 2: Open the browser and go to http://belkin.range which is the Belkin extender setup page.

Step 3: Simply follow the steps like entering the SSID and password for the Band channels and the type of security you want to enforce on the device. Click save once you’ve entered the settings to save them.

Wired connection

Step 1: After plugging in and switching on the Belkin Range Extender, you will start to see a “Belkin.setup” wireless network name. Until then, make sure you didn’t have anything connected to your Ethernet port. Connect to it.

Step 2: Open the browser and go to http://belkin.range which is the Belkin extender setup page.

Step 3: Simply follow the steps like entering the SSID and password for the Band channels and the type of security you want to enforce on the device. Click save once you’ve entered the settings to save them.

Wired connection:

Step 1: Have your PC connected to the range extender using an Ethernet cable.

Step 2: Turn the Range extender on by plugging it into a power source.

Step 3: Switch off your computer’s Wi-Fi.

Step 4: On any browser on your PC, Visit the link http://belkin.range

Step 5: Follow the steps and input information as asked in the Belkin extender setup page to set up the range extender and save the settings if you think they are accurate.

Those were the simple steps which are often used to setup the Belkin Range extender.
We are still, however, aware of the issues that most of the Belkin customers usually face. The following problems have been addressed which can help you resolve them easily.

Faqs

Question: How do I reset my Belkin Range extender if I’ve changed my Wireless router’s name or password?

Answer: To have your Range extender connected to the Wireless Router again, you will need to reset the Range Extender. For that:

Step 1: Find the RESET button on the range extender. Usually, it is present at the base of the device.

Step 2: When the device is on, press and hold down the Range Extender reset button for around 10 seconds.

Step 3: Connect your PC again to the “Belkin.setup” when nothing is plugged into the Ethernet port of the PC.

Step 4: In your browser, enter the link https://belkin.range to access the Belkin extender setup page and re-enter the settings of the range extender.

Question: What do you require to setup the N series Belkin Range extender?

Answer: To setup the Belkin Range Extender, make sure you have all the following:
An active internet connection in the form of a cable or a DSL modem which has an RJ45 port.
A PC or a laptop that has a NIC or the Network interface adapter.
Working TCP/IP connections installed on all the computers.
An Ethernet cable with RJ45 ports on both ends.
A working web browser on the PC or the Laptop.
An OS with a configuration of a 1 GHz processor and 512 MB RAM.

Question: Why am I unable to connect to the Wi-Fi?

Answer: There are several reasons why a Belkin Range Extender device is unable to connect to the Wi-Fi network. It could be because of any of the reasons mentioned below so you will have to go through each of them while negating each option before moving on to the next. The interruption or the unavailability of connection could be due to:
Wrong Wireless settings: There is a good possibility that while setting up your device in the Belkin setup page, you have entered wrong setting which is not in sync with the settings of your internet router. Recheck the settings after resetting your Range Extender and try to connect again.
Distance is too large: Another reason why you aren’t able to connect to the Wi-Fi is that the distance is too much between the wireless router and the Range extender. You have to move the range extender closer to the Wi-Fi device to resolve this.
Traffic congestion: Sometimes the bandwidth could be consumed by the multiple devices you are using in your house. This definitely decreases the bandwidth significantly which could result in your Range extender not receiving any data packet. Disconnect a few devices and then try again.
Obstruction and interference: A lot of times a simple reason for not being able to connect to see the connection or connect to it is because there is too much obstruction or interference from where the device is releasing the Wi-Fi signals till the devices you’re trying to connect. Try to move your devices away from objects like Microwave ovens, Cordless phones with the same frequency, Baby monitors, neighboring Wi-Fi devices, mirrors, steel beams and many others. Changing the channels to 1, 6, 9 and 11 on your wireless router or access point can also help you to move towards less interference as they are known as non-overlapping channels.